Guards Patch Khaki (8 x 5 cm) Hook Velcro Backing
HomeStore

Guards Patch Khaki (8 x 5 cm) Hook Velcro Backing

Guards Patch Khaki (8 x 5 cm) Hook Velcro Backing

Guards Patch Khaki is a clean, uniform-ready embroidered patch designed for quick attachment to compatible loop Velcro panels on caps, packs, organisers, or uniform sleeves where permitted. Built in a practical 8 cm (W) x 5 cm (H) format with a hook Velcro backing, it is easy to mount, remove, and swap when you want to refresh your setup.

Key Features

  • Size: 8 cm (W) x 5 cm (H)
  • Colour: Khaki
  • Construction: Embroidered patch
  • Backing: Hook Velcro (attaches to loop Velcro panels)
  • Use: Identification and kit organisation for everyday, outdoor, and tactical setups (use responsibly and where allowed)

Fit Guide for Singapore Buyers: Will it fit a standard Velcro sleeve?

Many “standard” Velcro sleeve or arm panels on uniforms and tactical apparel are commonly around the approx. 9 cm x 5 cm class, but exact sizing varies by brand, unit, and garment model. Because this guards patch khaki is 8 x 5 cm:

  • Height (5 cm): typically matches common sleeve panel heights well.
  • Width (8 cm): usually fits panels that are 8 cm wide or wider, and leaves a small margin if the panel is wider (for example 9 cm).

Best practice: measure your loop Velcro area before purchase. If your sleeve panel is at least 8 cm wide and 5 cm tall, this patch will fit the panel footprint properly.

How to Attach

  • Ensure your surface is a loop Velcro panel (soft side).
  • Align the patch edges, then press firmly across the full patch surface.
  • To remove, peel from one corner slowly to reduce wear on the panel.

Notes

  • Sample cap is not included.
  • Colour may appear slightly different depending on lighting and display settings.

FAQ

  • Q: Is the backing hook or loop?
    A: It has hook Velcro backing, so it attaches to a loop Velcro panel.
  • Q: Will this work on a normal fabric sleeve without Velcro?
    A: No. You will need a loop Velcro panel to mount it.
  • Q: Can I sew it on permanently?
    A: This patch is intended for Velcro attachment. If you need permanent mounting, you may stitch the edges, but that will be a custom modification and may affect removal.
  • Q: Is it allowed for all uniforms in Singapore?
    A: Rules vary by organisation and dress regulations. Please follow your unit, workplace, or venue guidelines for authorised patches and placement.
$3.50

Original: $10.00

-65%
Guards Patch Khaki (8 x 5 cm) Hook Velcro Backing—

$10.00

$3.50

More Images

Guards Patch Khaki (8 x 5 cm) Hook Velcro Backing - Image 2

Guards Patch Khaki (8 x 5 cm) Hook Velcro Backing

Guards Patch Khaki is a clean, uniform-ready embroidered patch designed for quick attachment to compatible loop Velcro panels on caps, packs, organisers, or uniform sleeves where permitted. Built in a practical 8 cm (W) x 5 cm (H) format with a hook Velcro backing, it is easy to mount, remove, and swap when you want to refresh your setup.

Key Features

  • Size: 8 cm (W) x 5 cm (H)
  • Colour: Khaki
  • Construction: Embroidered patch
  • Backing: Hook Velcro (attaches to loop Velcro panels)
  • Use: Identification and kit organisation for everyday, outdoor, and tactical setups (use responsibly and where allowed)

Fit Guide for Singapore Buyers: Will it fit a standard Velcro sleeve?

Many “standard” Velcro sleeve or arm panels on uniforms and tactical apparel are commonly around the approx. 9 cm x 5 cm class, but exact sizing varies by brand, unit, and garment model. Because this guards patch khaki is 8 x 5 cm:

  • Height (5 cm): typically matches common sleeve panel heights well.
  • Width (8 cm): usually fits panels that are 8 cm wide or wider, and leaves a small margin if the panel is wider (for example 9 cm).

Best practice: measure your loop Velcro area before purchase. If your sleeve panel is at least 8 cm wide and 5 cm tall, this patch will fit the panel footprint properly.

How to Attach

  • Ensure your surface is a loop Velcro panel (soft side).
  • Align the patch edges, then press firmly across the full patch surface.
  • To remove, peel from one corner slowly to reduce wear on the panel.

Notes

  • Sample cap is not included.
  • Colour may appear slightly different depending on lighting and display settings.

FAQ

  • Q: Is the backing hook or loop?
    A: It has hook Velcro backing, so it attaches to a loop Velcro panel.
  • Q: Will this work on a normal fabric sleeve without Velcro?
    A: No. You will need a loop Velcro panel to mount it.
  • Q: Can I sew it on permanently?
    A: This patch is intended for Velcro attachment. If you need permanent mounting, you may stitch the edges, but that will be a custom modification and may affect removal.
  • Q: Is it allowed for all uniforms in Singapore?
    A: Rules vary by organisation and dress regulations. Please follow your unit, workplace, or venue guidelines for authorised patches and placement.

Product Information

Shipping & Returns

Description

Guards Patch Khaki is a clean, uniform-ready embroidered patch designed for quick attachment to compatible loop Velcro panels on caps, packs, organisers, or uniform sleeves where permitted. Built in a practical 8 cm (W) x 5 cm (H) format with a hook Velcro backing, it is easy to mount, remove, and swap when you want to refresh your setup.

Key Features

  • Size: 8 cm (W) x 5 cm (H)
  • Colour: Khaki
  • Construction: Embroidered patch
  • Backing: Hook Velcro (attaches to loop Velcro panels)
  • Use: Identification and kit organisation for everyday, outdoor, and tactical setups (use responsibly and where allowed)

Fit Guide for Singapore Buyers: Will it fit a standard Velcro sleeve?

Many “standard” Velcro sleeve or arm panels on uniforms and tactical apparel are commonly around the approx. 9 cm x 5 cm class, but exact sizing varies by brand, unit, and garment model. Because this guards patch khaki is 8 x 5 cm:

  • Height (5 cm): typically matches common sleeve panel heights well.
  • Width (8 cm): usually fits panels that are 8 cm wide or wider, and leaves a small margin if the panel is wider (for example 9 cm).

Best practice: measure your loop Velcro area before purchase. If your sleeve panel is at least 8 cm wide and 5 cm tall, this patch will fit the panel footprint properly.

How to Attach

  • Ensure your surface is a loop Velcro panel (soft side).
  • Align the patch edges, then press firmly across the full patch surface.
  • To remove, peel from one corner slowly to reduce wear on the panel.

Notes

  • Sample cap is not included.
  • Colour may appear slightly different depending on lighting and display settings.

FAQ

  • Q: Is the backing hook or loop?
    A: It has hook Velcro backing, so it attaches to a loop Velcro panel.
  • Q: Will this work on a normal fabric sleeve without Velcro?
    A: No. You will need a loop Velcro panel to mount it.
  • Q: Can I sew it on permanently?
    A: This patch is intended for Velcro attachment. If you need permanent mounting, you may stitch the edges, but that will be a custom modification and may affect removal.
  • Q: Is it allowed for all uniforms in Singapore?
    A: Rules vary by organisation and dress regulations. Please follow your unit, workplace, or venue guidelines for authorised patches and placement.